• We use email or Facebook
  • youghalsailing@gmail.com

    More on wetsuits, Drysuits & other Gear for sailing

    Dinghy Sailing Gear

    Dinghy sailing clothing has improved considerably over the last 20 years making it feasible to remain warm and dry in most conditions. Improvements include new 'breathable' fabrics allowing perspiration to evaporate and escape without allowing seawater in. The choice of dinghy sailing clothing or sailing waterproofs is between drysuits for sailing verses sailing dinghy wetsuits. A lightweight 'shortie' sailing wetsuit for summer sailing, leaves the arms and lower legs uncovered is the most suitable, while cold weather conditions call for a full wetsuit and in winter use, a suit with seals at the neck, ankle and wrist. Improvements in materials have transformed the sailing drysuit that is easy and quick to put on and offering total protection. 

     

    Dinghy Sailing Drysuit

    Previously you could not wear a sailing drysuit for an extended period because undergarments became soaked with perspiration, but with the development of breathable fabrics this problem has been overcome.

    A sailing [ drysuit ] has latex seals at the neck, wrist, and feet sealing water from the body and come in one-piece and two-piece suits. Controlling body temperature, when wearing drysuits for sailing, involves choosing the clothing that is worn underneath. Shorts and a T-shirt are sufficient in warm weather but in colder conditions, wear thin thermal clothing .

    The dinghy sailing drysuit is full of air when zipped up so squatting down forces the air out of the legs and pulling the neck seal open deflates it around your body.

     

    Dinghy Sailing Wetsuit

    A sailing dinghy wetsuit is the means of staying warm where staying dry is not an option. Dinghy sailing wetsuits are made from neoprene and are close fitting. When totally immersed, the wetsuit allows a thin layer of water to be trapped between the skin and the suit and this warms up by body heat, insulating the body against cold.

    This works well if the sailing wetsuit is a perfect fit and prevents any more cold water flushing through the layer. A close-fitting wetsuit is vital for warmth and comfort and if buying off the rack make sure of a correct fit or buy a made-to-measure wetsuit. For summer and winter sailing, different weights of neoprene are used.

    Choosing a Sailing Wetsuit

    With a tight fitting sailing dinghy wetsuit, the neoprene must stretch to provide maximum freedom of movement. Modern neoprene is lighter and more supple than predecessors, and laminate materials allow thinner, lighter and suppler neoprene that maintains the same body heat. The best wetsuit for dinghy sailing has a standard thickness of 5mm body and 5mm legs used in conjunction with flexible 3mm arms for the coldest sailing conditions, while a 3mm body should suffice for summer use.

    The stitching that holds neoprene panels of a wetsuit together has an impact on the quantity of water that can flush through. The basic form of stitching is the mechanical overlock, that punctures the neoprene with many tiny holes allowing water through.

    This is acceptable for a summer suit, but is not suitable for cold weather sailing. The flatlock and blindstitching method uses a stitch that pierces one side of the edge of the panel and then is bonded and taped with neoprene glue producing a watertight join. Consider these guidelines when reading sailing wetsuit reviews to choose the best wetsuit.

    Neoprene is sometimes lined with lycra on the inside making it easy to pull on and off the body and may also be lined on the outside increasing both abrasion and tear resistance. A good fit at the neck, wrists and ankles is essential in preventing cold water flushing through the suit, and the zipper running straight up the spine should have two overlapping neoprene flaps or a single C-Flap folding over as a water sealant. An alternative solution is no zip at all, which is possible with the most modern flexible neoprene.

    It is easier to get in and out of a wetsuit with ankle zips, but they are expensive and allow water flush through. Knee pad reinforcement built into the suit, is essential for any style of sailing where the crew works on their knees.

    Dinghy Suits

    The dinghy suit is sufficient protection in open boat sailing to stay warm and dry and where there is no need to end up in the water launching, retrieving or capsizing. Dinghy suits are manufactured in proofed nylon featuring a separate smock with a neoprene waistband and velcro-adjustable wrist and neck closure. This is worn over chest-high trousers with an adjustable ankle closure or a pair of dinghy shorts.

    Look for reinforced knees and seat for longevity, a short zipper at the neck of the smock, full length zip on the trousers making them easy to put on and off, and pockets. The fit should be loose, light and comfortable allowing thermal layers to be built up underneath. Breathable outer materials are available at the top end of most ranges. One-piece dinghy suits are also available and are lighter and more comfortable to wear at the expense of being a single garment.

    Dry Tops

    The dry top bridges the gap between the dinghy smock and drysuit, using latex seals at the neck and wrists plus a deep, neoprene waistband to create a fully waterproof top that can effectively be worn with dinghy trousers, a long john or a convertible-style wetsuit.
    Thermal Underclothing

    In cold weather, thermal underclothing is always worn beneath drysuits and dinghy suits. Using [ stretch fleece materials ] that are light and quick drying when wet, such as Polartec, which enables layers of internal warmth to be built up with minimal bulk. When used with a breathable outer suit, thermal underclothing draws perspiration away from the body and dissipates it rather than being trapped on the surface of the skin becoming cold leaving the wearer feeling clammy and wet.

    Hiking Shorts

    Hiking off the deck of a small dinghy can be harsh and uncomfortable. The [ hiking shorts ] role is to provide a soft layer between the posterior and the deck using a combination of mesh, neoprene, straps and padding.
    Dinghy Sailing Knee Pads

    Knee pads are necessary on high performance dinghies and catamarans where the crew work on their knees needing the knee protection of neoprene and kevlar reinforcement.
    Sailing Trapeze Harnesses

    The primary feature when looking for in a [ trapeze harness ] is comfort and a precise fit is one that moulds to the body. Resist buying a sailing trapeze harness unless it can be tested on dry land. Simulating the reality of trapezing on the water is hard to do on dry land but test or seek answers to these questions from the retailer:

        Can the trapeze harness be quickly fitted and released with reliable buckles being simple and fast to adjust?
        Can it be worn with your wetsuit/drysuit and buoyancy aid and still be comfortable and easy to use?
        Does it still feel comfortable when bending and stretching?
        When hanging off a line is it comfortable around the hips and groin area?

    The popular style of sailing trapeze harness is the Nappy, featuring a full back with padded straps; padded waist flaps either side with a padded crutch strap that passes between the legs. An alternative replaces the nappy component with twin thigh straps needing to be padded well as they pass either side of the groin.

    Good back support maintains a straight-out stance in a harness, but skiff-style of sailing requires a sit-up stance along with upper body mobility.

    Many skiff sailors on short course racing favour the windsurfer type of harness with no upper back support. Lower back support is provided by padded foam inserts and hip tensioning points.

    The load across the hips is taken by an aluminium spreader bar which spreads the load and prevents crushing. Adjustable hook height is a useful when requiring extra lumbar support. Shoulder, hip and thigh straps should have a quick and easy adjustment system using velcro or buckles the ends of webbing straps tidied away and not interfering with the hook.

    Trapezing involves a lot of sliding in and out on your posterior and a tough reinforcement material such as Cordura provides durability in the seat area. Custom made-to-measure harnesses that provide a perfect fit can be obtained from specialist manufacturers.

     

    Clothing for Yacht Sailing

    The right yacht clothing is important when afloat, but especially when sailing offshore. The dinghy sailor has the luxury of hot shower at the end of the day, but the cruising sailor is at sea, sometimes in unpleasant conditions for days or even weeks.

    When afloat it is always cooler than ashore and when sailing in temperate areas staying warm is a necessity. Cold reduces the ability to think and act efficiently along with increasing the risk of seasickness. When sailing offshore, it is important to wear the right yacht clothing in order to maintain a comfortable working temperature.

    To stay warm, yacht clothing  should provide sufficient insulation with a barrier layer stopping the warm layer getting wet eliminating wind chill.

    Silk and wool are the best natural insulators, but so are modern synthetic fibres. Being very light and able to dry quickly they wick moisture away from the skin, keeping the wearer dry and warm.

    Marine clothing manufacturers, such as Musto, Henri-Lloyd, Splashdown, Helly-Hansen and Gill, make a specialist, multi-layered clothing arrangement. This consists of a thin, light, underwear layer, over which is worn a thicker, warm layer. Either layer can be worn separately to suit different temperatures with a top, waterproof layer keeping the wearer dry. The latest designs of yacht clothing use waterproofs made of breathable material that keep water out while allowing perspiration trapped inside to pass through. These waterproof designs are expensive, but are worth buying as they are the lightest, most comfortable and warmest yacht clothing available.
    Sailing Jacket and Trousers

    A sailing jacket for coastal use is fairly basic waterproof design whereas an offshore jacket requires waterproof cuffs, a high collar and hood protecting the head and space for a built-in harness and buoyancy, and pockets for equipment as well as reflective patches that are visible at night. Lightweight, vapour-permeable materials such as Gore-Tex were a welcome invention being lighter and flexible than the previous standard of proofed nylon but they are expensive.

    Waterproof trousers should be cut high, so there no gap during any body motion at waist level between the trousers and the sailing jacket and be fitted with ankle tighteners. There should be reinforcement on the seat and knees and a lining to prevent condensation forming on the inside of the trousers.
    Yacht Deck Shoes and Boots

    The popular leather deck shoes are the footwear for temperate conditions, except racing dinghies where zip-up boots are used. Make sure the deck shoes are designed for use afloat rather than fashion items manufactured from tanned leather that survives repeated wetting and drying along with rot-proof stitching. Offshore sailing requires boots with thick, well-insulated soles.

    Avoid the foam rubber insole, which when wet, takes a while to dry. Knee-high boots should be the choice as short ones tend to come apart from trousers when sitting down and there is the possibility of them filling with water.

     

     

     

    Facebook - YoughalSailing

    ISA Affiliated Club